Inspection report




The type inspection report is the type inspection result judgment document issued by the type inspection organization.



Type inspection is a sampling inspection for products to prove that the quality of products meets all the requirements of product standards. It constitutes many types of certification




The basis is to evaluate the qualification of one or more representative product samples by means of inspection. At this time, the quantity of samples required for inspection shall be determined by the quality and technical supervision department or inspection agency and sealed by spot sampling; the sampling location shall be randomly selected from the final products of the manufacturer. The inspection site shall be conducted by an independent and recognized inspection organization. The type inspection is mainly applicable to the evaluation of the comprehensive finalization of products and the judgment of whether the quality of all products of the enterprise has fully met the standards and design requirements



2. Work content



1. Invite type inspection agency:



After receiving the acceptance notice, the unit applying for product manufacturing license shall submit the letter of intent for product type inspection applying for manufacturing license to the organization qualified for type inspection in accordance with relevant management measures, and submit the acceptance notice of manufacturing license (copy). The type inspection agency shall conduct type inspection according to the product category and variety applied for manufacturing license in the acceptance notice.



2. After receiving the request from the applicant, the type inspection agency shall, according to the time agreed by both parties, send 2-4 inspection and testing personnel to form a type inspection team, with a qualified reviewer as the team leader, to the manufacturer for product sampling and relevant inspection.



3. Specific work content:



3.1 product sampling: the type inspection team shall conduct sampling according to the product sampling rules specified in the standard. Product sampling shall be carried out in the warehouse of the manufacturing unit by randomly selecting the inventory products that have passed the inspection of the quality inspection department of the manufacturing unit.



3.2 design data review: the type inspection team shall review the drawings, calculation sheets and other design data of the sampled products.



3.3 type inspection: if the manufacturer has the conditions for type inspection on site, the products shall be sampled and tested on the site of the manufacturer. If the manufacturer does not have the conditions for type inspection on site, the manufacturer shall be responsible for shipping the sealed products to the location of the type inspection organization after sampling;



3.4 issue of type inspection report: the type inspection agency shall issue the type inspection report (three-year validity period) within the specified date after the completion of the product type inspection, and the report shall be divided into the manufacturer, review agency, acceptance agency and filed.




4 inspection situation



1. Trial production and finalization identification of new products and old products transferred to other factories.



2. After formal production, due to great changes in structure, material and process, product performance may be affected.



3. In normal production, a periodic inspection shall be carried out after a certain amount of production is accumulated or regularly.



4. After the product is stopped for a long time, the production is resumed.



5. The factory inspection results are quite different from the last type inspection.



6. When the national quality supervision organization puts forward the requirements for type inspection.



5 inspection organization



1. Product certification or new product identification: it shall be conducted in a third-party independent inspection institution recognized by the quality supervision institution and relevant certification institutions. For some special inspection items, if the inspection organization lacks the required inspection equipment, it can use the inspection equipment of the manufacturer under the supervision of independent inspection organization or certification organization;



2. Regular type inspection of products: if the manufacturer has the conditions for type inspection on site, it can be carried out at the manufacturer's site; if the manufacturer does not have the conditions for type inspection on site, it can be carried out by a third-party independent inspection institution approved by the quality supervision institution and relevant certification institution.